Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mission, TX
When a Mission chimney needs real work, the job usually has less to do with firewood and more to do with everything this climate throws at a flue. Chimneys across Mission are mostly decorative masonry or prefab metal fireplaces in ranch and Spanish-style homes, used lightly and then left to face humid summers, wind-driven rain and blowing Valley dust. That combination cracks crowns, loosens caps and packs flues with debris rather than creosote. We handle chimney repair, sweeping and dryer vent work with professional-grade brands and a written estimate before anything starts. Call (866) 566-0403.
Why Mission Homes Are Different
Mission sits in the Rio Grande Valley, and the weather here rewrites the usual chimney rulebook. Northern sweeps count on a hard burn season and heavy creosote; Mission homeowners rarely light a fire at all, so the wear lands on the outside of the chimney instead. Hot, humid summers and the June-to-September rainy season push water against stucco and brick veneer, and wind-driven rain finds every cracked crown, missing cap and failed flashing. Then the dust settles in. A flue that has sat unused for a year can hold leaves, Valley dust and the occasional bird or wasp nest.
The housing stock shapes the work too. Homes across 78572 and the newer subdivisions off Expressway 83 and 495 are predominantly single-story ranch and Spanish or Mediterranean-style builds with prefab metal fireboxes or decorative masonry fireplaces. On the city’s edges, colonia-style homes often have simpler masonry chimneys that need closer watching. The first big summer downpour tends to reveal cracked crowns and missing caps on those stucco chimneys long before anyone thinks about winter burning.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mission Services
Most Mission homeowners call us about one of two things: a chimney that needs sweeping or repair, or a dryer vent that has quietly become a fire risk.
Chimney Sweep in Mission
A Mission sweep is usually less about soot and more about what the Valley puts in a flue. We pull leaves, dust, nests and debris, then inspect the cap, crown and flashing while we’re up there, because that’s where the real damage shows. If your fireplace has seen light use, the cleaning may be quicker than you expect, but the inspection still matters. A camera check and photo report come with the visit so you can see what we see. For the full rundown on scheduling and what a visit includes, see Chimney Sweep in Mission.
Dryer Vent Cleaning in Mission
Lint builds up in a dryer duct the way creosote builds in a flue, and in Mission’s humid air a clogged vent also traps moisture that shortens the life of the duct and the appliance. We treat dryer vent cleaning as fire-safety work on the same level as chimney sweeping, not an add-on. The run gets cleared, the exterior termination checked, and you get a clear picture of what came out. If it’s been a few years, it’s worth a look. Details are on Dryer Vent Cleaning in Mission.
Chimney Repair in Mission
Chimney repair in Mission is driven less by heavy burning and more by water and time. The late-20th-century and newer ranch and Spanish-style homes here put stucco and brick veneer in front of chimneys that face humid summers and a hard rainy season, so crowns crack, caps go missing and flashing pulls away long before the flue ever sees serious heat. That’s the pattern we see across Mission, and it’s why our Chimney Repair work starts with the outside of the chimney, not just the inside.
Chimney Cap Installation
Signs you need it
You’re finding leaves, dust or nesting material in the firebox, or the flue is open to the sky with nothing over it.
What it costs in Mission
Chimney cap installation in Mission typically runs $150 to $400, depending on the flue size and the cap style.
How we do it
We measure the flue, fit a stainless cap sized to the opening, and secure it to the crown so wind-driven rain and critters stay out.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted, bent, loose or missing screens, or a storm has shifted it off the flue.
What it costs in Mission
Replacing a cap in Mission typically costs $175 to $450, with the range set by the cap type and how much of the old hardware has to come off.
How we do it
We remove the damaged cap, check the flue top and crown for related damage, and set a new cap with proper fastening.
Chimney Crown Repair
Signs you need it
You can see a crack across the concrete crown, or water is staining the chimney interior after a summer storm.
What it costs in Mission
Crown repair in Mission typically runs $300 to $700, and a full crown rebuild lands toward the top of that range.
How we do it
We clear the cracked material, form a proper slope so water runs off, and pour or resurface the crown so it sheds rain away from the flue.
What Chimney Repair Costs in Mission
| Item | Typical range in Mission |
|---|---|
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $175 – $450 |
| Chimney crown repair or rebuild | $300 – $700 |
Does a cracked chimney crown really need fixing in Mission?
Yes. A cracked crown lets rainwater into the chimney structure, and in Mission’s rainy season that water causes steady damage to masonry and the flue. Small cracks caught early cost far less than a rebuild. Call (866) 566-0403 for a free estimate.
Can you repair a Mission chimney cap the same day?
Often, yes. Cap replacement is a straightforward job when the crown underneath is sound. If the inspection turns up crown or flashing damage, we’ll show you the photos and quote the full repair before doing anything. Estimates are free.
Brands We Service in Mission
We install and service professional-grade components, and we name them: DuraFlex flexible liners for irregular or aging flues, HeatShield resurfacing for liners that can be restored rather than replaced, and Olympia Chimney and Copperfield parts for standard venting repairs. Nothing is ordered on a guess, so turnaround stays predictable. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mission, TX
| Service | Typical range in Mission |
|---|---|
| Chimney sweep | $150 – $350 |
| Chimney inspection with photo report | $125 – $275 |
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $175 – $450 |
| Chimney crown repair or rebuild | $300 – $700 |
| Chimney flashing repair | $250 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield liner resurfacing | $1,200 – $3,000 |
| Dryer vent cleaning | $100 – $250 |
In Mission, price climbs when water damage has spread beyond the crown into flashing or the flue itself, and when a chimney with a rough, irregular interior needs a full liner rather than a resurfacing. Roof pitch and access can add time as well. The written estimate sets the final price, and the estimate itself is free.
Neighborhoods We Serve in Mission
We work across Mission, from the older streets near downtown out to the newer subdivisions along Expressway 83 and 495, and out toward the colonia-style homes on the city’s edges. Most Mission addresses fall in the 78572 ZIP, and the work is the same wherever we go: inspect first, show you the evidence, then quote. Our technicians have up to 12 years of experience, and we answer 24/7 for scheduling.
- Downtown Mission
- Sharyland area
- Subdivisions off Expressway 83
- Subdivisions off FM 495
- Colonia communities on the city’s edges
Response across the Mission area is straightforward: fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Service Area – Cities Near Mission
Mission sits right in the middle of our service area, and we cover the towns around it as well. If you’re just outside the city limits, we can usually get to you without trouble. We also work in Alton, TX, Palmhurst, TX, Citrus City, TX and Doffing, TX, all within easy reach of Mission. Same standards apply everywhere: camera inspection, photo report, flat price agreed before booking.
Serving Mission, TX – Our Local Coverage Area
We serve Mission and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mission
Yes. We cover Mission from downtown out to the subdivisions along Expressway 83 and 495 and the colonia areas on the edges. Call (866) 566-0403 for scheduling. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
It depends on the work. Cap and crown repairs usually don’t require one, while structural changes or a full reline may. Ask the city’s building department before work begins, and we’ll tell you what the estimate covers.
Usually within a few days. Scheduling depends on the season, and summer storm damage tends to fill the calendar quickly. Call (866) 566-0403 and we’ll book you into the next available opening. Estimates are free.
If your Mission chimney is letting in water, holding debris or showing wear, call (866) 566-0403 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Rosa Reyes"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gabriela Rodriguez"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Erin Hayes